Business Integrity And Mutual Benefit

Home ProductsPerforated Mesh Sheet

Perforated Metal Mesh

Certification
Good quality Galvanized Serrated Grating for sales
My grate came today and it fit perfectly. Thank you. Let me know if there is anywhere that I can leave positive feedback about your company!

—— Andrew Mullen

I'm Online Chat Now

Perforated Metal Mesh

Square Hole Perforated Metal Mesh Length 1m Galvanized Perforated Sheet

  • Square Hole Perforated Metal Mesh Length 1m Galvanized Perforated Sheet
  • Square Hole Perforated Metal Mesh Length 1m Galvanized Perforated Sheet
Product Details:

Round Hole Galvanized Perforated Metal Mesh Low Carbon Steel Q235

 

 

1. Thickness of Metals

 

Steel:Use“Manufacturers”Standard Gauge for steel sheet.

Stainless Steel:Use the U.S. Standard Gauge Table.

Monel: Use the U.S. Stangard Gauge Table.

Copper, Brass, or Muntz: Use the B&S Gauge Table.

Aluminum: Use the B&S Gauge Table.

 

2. Perforations

 

Round Perforations: Staggered (60 degree pattem) is stangard. Vaniations include 45 degree staggered, and straight line pattern.

Square Perforations: Staggered or straight line pattern.

Slotted Perforations: Side staggered, end staggered, or straight lines. Slotted perforations will be round end slots: specify if square end slots are required.

Other Perforations: Available upon request.


3. Pattern of Perforations

 

Staggered Perforations ,both Round &Square: Direction of the stagger will normally be the short dimension of the sheet. Straight row of hole is normally parallel to long dimension of sheet.

Slotted Perforations: The long dimension of the slots can be fumished with either the width or length of the sheet in most cases.

 

4. Margins

 

Perforated Stock Size Sheet & Plates: The long sides of the sheet will be suppiled with minimummargins. The short sides of the sheet will have either minimum margins or no margins.

Sheets & Plates Re-sheared after Perforating: Special margins are available to specifications but the must carry a tolerance within the limits of the perforating tool.

Unfinished end pattern is standard in the industry.

 

5. Flatness of Sheet &Plates

 

In the majority of requirements, perforated sheets or plates can be furnished to AISI flatness tolerances. Before ordering any of the following special requirements, discuss then witn our sales department:

Perforated sheets with extra wide margins.

Blank areas required within the perforated area.

Perforated sheets with very large percentage of open area.

Heavy page metal in relation to the size of the perforation.

Special alloys.

Stretcher leveled sheets.

 

Stainless steel etching mesh sheet / perforated stainless steel wire mesh
Material: stainless steel,copper
Size: as your request
Colors: metallic,black
color as per customer's request
Logo: Customized logo available
Thickness 0.03-1.5mm
Tolerance +/-0.05mm
MOQ: 500pcs
Sample Lead Time: about 5-7 days
OEM/ODM: Acceptable
Packing: 1)Way Of Packing:one polybag for each products and then put into a carton box or wooden box
2)Kindly Notice:If necessary, we can pack as per your requirments.
Weekly Capacity: 10000pcs
Port: Shenzhen,Guangdong, China(mainland)
Delivery: by FedEx,TNT,UPS,DHL,etc.
Payment Term: Paypal, T/T, Western Union

Size Customized Perforated Metal Mesh Anti Corrosive For Construction Wall

  • Size Customized Perforated Metal Mesh Anti Corrosive For Construction Wall
Product Details:

Stainless Steel 304 /316 Perforated Metal Mesh / Perforated Wire Mesh


 Advantages

1). Our company produce various specifications,models as per standards
2. Using high -quality material and advanced production technology and equipment for processing
3. Applicable to a humid climate and the harsh corrosive enviroment
4. Products has been exported to Europe,North American,the Middle East,South East Asia,Africa,Asia,European,other countries and regions
5. We are Alibaba Trade-assurance company,Place orders online,get full protection.

 

Applications

Parclose for noise in supper highway ,railway,the subway
Construction wall
Acoustic panel in factory workshop,generator room and other noise source
Acoustic material in ceiling,wall board
Decorate plate in stairs,balcony,environmental protection tables
Protection cover for machine
Screen cover for loudspeaker box
Fruit basket,food cover ,compote in kitchen
Shelf network in market
Decoration exhibition
Ventilation net in grain depo
Water percolation in football field turf

Stainless Steel 304 /316 Perforated Metal Mesh / Perforated Wire Mesh
Material: stainless steel,copper
Size: as your request
Colors: metallic,black
  color as per customer's request
Logo: Customized logo available
Thickness 0.03-1.5mm
Tolerance +/-0.05mm
MOQ: 500pcs
Sample Lead Time: about 5-7 days
OEM/ODM: Acceptable
Packing: 1)Way Of Packing:one polybag for each products and then put into a carton box or wooden box
2)Kindly Notice:If necessary, we can pack as per your requirments.
Weekly Capacity: 10000pcs
Port: Tianjin, China(mainland)
Delivery: by FedEx,TNT,UPS,DHL,etc.
Payment Term: Paypal, T/T, Western Union
Plate
Material
Thickness of
Metal (mm)
Hole
Dia. (mm)
Pitch
(mm)
Sheet
Width (m)
Sheet
Length (m)
Porosity
(%)
Weight
(kg/m2)
Rolling
plate
0.2 6 2 1 20 44 0.88
  0.35 5 4 1 20 24 2
  0.45 6 3 1 20 35 2.5
  0.8 3 3 1 20 19.6 3
Flat plate 0.5 1 1 1 2 19.6 3.14
  0.55 1.1 2.2 1 2 22.67 3.411
  0.55 1.5 2.8 1 2 26.03 3.268
  0.8 1.5 1.5 1 2 19.6 5
  0.8 2.0 3.4 1 2 30.78 4.465
  1.5 2 2 1 2 19.6 9.4
  1.5 5.0 8.0 1 2 35.39 7.843
  3 5 16 1 2 19.6 18.8
Stainless
steel plate
0.5 1 1 1 2 19.6 3.14
  0.8 1.5 1.5 1 2 19.6 5
  1 2 2 1 2 19.6 6.28
  2 5 16 1 2 19.6 6.28
Aluminum
plate
0.5 1 1 1 2 19.6 1.08
  0.8 3 3 1 2 19.6 1.72
  1.6 2 2 1 2 19.6 3.24
  3 4 16 1 2 19.6 4.23
 

 

Round Hole Galvanized Perforated Metal Mesh Acid Resisting For Indoor Sound Insulation

  • Round Hole Galvanized Perforated Metal Mesh Acid Resisting For Indoor Sound Insulation
Product Details:

Round Hole Galvanized Perforated Metal Mesh Low Carbon Steel Q235

 

 

1. Material:

 

Steel, iron, aluminum, copper, stainless steel and other metal plates and non-metallic sheet


2. Features:

 

Stamping made, net surface flat, smooth, beautiful, strong and durable


3. Specifications:

 

Coil 1x20m, flat 1x2m, can also be customized according to customer needs processing

Specification:

(1)cold rolled steel sheet

thickness:0.2mm-1mm

length:1mm-20mm

hole diameter:0.8mm-10mm

(2)plate thickness:0.3mm-10mm

size:s1.5x3m

hole diameter:0.8mm-100mm

 

4. Uses:

 

Mining, medicine, food selection, indoor sound insulation, silencers, ventilation, grain storage, mechanical protection,

 

5. Thickness or Gauge

 

Thickness of the matel sheets do not change during the perforation. Normally thickness is expressed in gauge, please see the picture. However, to avoid possible misunderstanding, we would suggest to express them in inches or millimeters.

 

6. Width and Length

The most common width and length are as follows:

1000mmX2000mm

1220mmX2400mm

1250mmX2500mm

1250mmX6000mm

1500mmX3000mm

1500mmX6000mm

However, we also manufacture other sheet sizes according to clients' requests.

7. Margins

Margins are the blank (un-perforated) area along the edges of the sheet. Normally the margin on the length are 20mm minimum, and margin along the width can be 0 minimum, or at clients' requests.

8. Hole Arrangement

Round holes are normally arranged in 3 types. Other hole patterns and hole arrangements can be custom made.

9. Hole pattern:round, square, hexagonal, scale, rectangular, triangle, cross, slotted

 

Opening (mm) Center type(mm) Thickness of sheet(mm)
min-max
Size (mm) Stainless
Steel
Iron Aluminium
2×10 ≥3 0.4-2 1220×2440
2×15 ≥3 0.4-2 1220×2440
2×20 ≥3.5 0.4-2 1220×2440
1.5×15 ≥3.5 0.4-2 1220×2440
3×10 ≥4 0.4-2.5 1220×2440
2.5×10 ≥3.5 0.4-2.5 1220×2440
3.5×10 ≥4.5 0.4-3 1220×2440
4×5-25 ≥5 0.4-3.5 1220×2440
5×5-25 ≥6.5 0.4--4 1220×2440
10×10 ≥12 0.5--4 1220×2440
12×15 ≥14 0.5-4 1220×2440
15×16 ≥18 0..6--4 1220×2440
20×20 ≥23 0.8---4.5 1220×2440
22×23 2≥5 0.8-4.5 1220×2440
Above specifications for reference only,specifications can be customized according to user needs.

Silver Galvanized Perforated Metal Mesh For Industrial / Architecture

  • Silver Galvanized Perforated Metal Mesh For Industrial / Architecture
Product Details:

Staggered Centers Round Hole Perforated Metal Mesh 41 % Open Area Sliver Galvanized Anping

Perforated Metal is broadly used in Industrial and Architectural applications such as; oil filters,
grain sifters, sound isolation and ventilation.

The round hole perforation is the most popular type of perforated pattern. We can cut to size to
your specific requirements.

Perforated metal is descibed by the hole size and the pitch. The pitch is the distance from the
centre of one hole to the centre of the adjacent holes. All our perforated sheets are on a
triangular pitch.

Perforated sheets are very useful for guarding and ballustrading where a strong smooth finish is
required with a small apeture.
1. Perforated metal material:
Stainless steel plate, steel plate, copper plate, aluminum plate, nickel plate, Al-Mg plate
2. Perforated metal surface treatment:
Electro galvanized, hot-dipped

 

4. Perforated metal hole pattern:
Round hole, square hole. Slot hole round ends, slot hole, triangle hole, hexagonal hole, scale hole. Rectangular hole, Cross, Diamond
Round hole: Plate thickness 0.4-6.0mm
Hole size: 1.0-25mm
Center to center distance: 3-34mm
Opening rate: 23%-49%
Square holes: Plate thickness 0.8-3.0mm
Hole size 3.0-50.0mm
Center to center distance: 5.0-100.0mm
Opening rate: 16%-64%
Slot holes round ends: Plate thickness: 0.5-3.0mm
Hole size: 1.0x1.0mm - 10 x 45mm
Center to center distance: 4.0 X6.0 - 20 x 60mm
Opening rate: 18%-76%
 

term Cable Diameter (mm) Cable NO. Cable Pitch (mm) Rod Diameter (mm) Rod Pitch (mm) Weight (kg/m2)
KC-311 3 3 40 3 11 9.5
KC-415 2.75 2 40 4 15 9.41
KC-36 2 4 50 3 6 11.56
KC-310 2 3 80 3 10 6.6
KC-153 1.75 4 26.4 1.5 3 5.3
KC-47 1.05 2 36 4 7 14.9
KC-24 1 4 36 2 4 7
KC-082 0.6 2 5.5 0.8 2 3.1
KC-0516 0.45 3 3.5 0.5 1.6 2.1

 

5/32"
3.97mm

3/16"

0.027-0.066"

0.68-1.68mm

63.00%

3/16"

4.76mm

¼"

0.027-0.127"

0.68-3.23mm

50.00%

1/4"

6.35mm

3/8"

0.033-0.111", 0.25"

0.84-2.82mm, 6.35mm

40.00%

3/8"

9.52mm

½"

0.053-0.082", 3/16"

1.35-2.08mm, 4.76mm

51.00%

3/8"

9.52mm

9/16"

0.059", 0.119"

1.50mm, 3.02mm

40.00%

1/2"

12.70mm

11/16"

0.033-0.127", 3/16"

0.84-3.23mm, 4.76mm

48.00%

1/4" Hex

6.35mm Hex

0.285

0.027-0.033

0.68-0.84mm

76.00%

304 / 316 Stainless Steel Perforated Metal Mesh For Decoration Exhibition

  • 304 / 316 Stainless Steel Perforated Metal Mesh For Decoration Exhibition
  • 304 / 316 Stainless Steel Perforated Metal Mesh For Decoration Exhibition
Product Details:

Stainless Steel 304 /316 0.5mm Thickness Perforated Metal Mesh Square

 

Specifications of High quality wire mesh /screen punching metal perforated sheet

  • Plate thickness:0.2-1mm
  • Length of plate:20m
  • Aperture size:1.5-10mm

High quality wire mesh /screen punching metal perforated sheet Perforate way:

  • super thick perforation,
  • super thin perforation,
  • micon aperture perforatio,
  • wire cutting perforation

Material of perforated mesh screen:

  • stainless steel ,
  • low carbon steel,
  • galanizing ,
  • PVC,
application of High quality wire mesh /screen punching metal perforated sheet :
  • Parclose for noice in supper highway ,railway,the subway
  • Construction wall
  • Acoustic panel in fatory workshop,generator room and other noice source
  • Acoustic material in ceiling,wall board
  • Decorate plate in stairs,balcony,environmental protection tables
  • Protetion cover for machine
  • Screen cover for loudspeaker box
  • Fruit basket,food cover ,compote in kitchen
  • Shelf nework in market
  • Decoration exhibition
  • Ventilation net in grain depo
  • Water percolation in football field turf

Features of High quality wire mesh /screen punching metal perforated sheet :

  • Easy to process
  • Can spray paint or burnishing
  • Easy to fix
  • Various thickness,aperture shape and permutation
  • Good effect of absorption
  • Light weight
  • Long time service
  • Precise size
Specifications Options
1.Material

AISI304/304L/

201/316/316L

Aluminum/pure Al/alloy Al Mild/Iron steel

Galv.steel/

Gal.30/40/60/90

PVC Others
2.Hole shape round square slot triangle hexagonal clover others

3. Dimensions(mm)

(length*width*thickness)

Customize,such as:1000*2000*1.0,1250*2500*2.0..
3.Hole dia*pitch(mm) Customize,such as:2.0*5.0,3.0*6.0
4. Perforated pattern straight Stagered:45degree,60degeree,120degree...
5.Fabrication bended coiled others
6.Margin No margin Common margin Special requirment
7.Finish Powder coated galvanised polished No finishing
8. Payment terms          

 

 

Hole Hole diameter From center to center between holes Ticness Arrangement Open Area
round 0.4 1.4 0.4 60 7.40%
round 0.5 1.5 0.5 60 10.08%
round 0.6 1.6 0.5 60 12.75%
round 0.7 1.4 0.5 60 22.67%
round 0.8 1.8 0.8 60 17.91%
round 1 2 1 60 22.67%
round 1.5 2 0.5 60 51.01%
round 1.5 2.5 0.6 60 32.65%
round 1.5 3 1 60 22.67%
round 2 3 0.5 60 40.31%
round 2 4 1 60 22.67%
round 2 5 2 60 14.51%
round 3 5 1 60 32.65%
round 5 8 2 60 35.43%
round 8 12 2 60 40.31%
round 10 12 2 60 62.98%
Contact Details
ANPING BAOSHENG WIRE MESH PRODUCTS CO.,LTD

Contact Person: Mr.

Tel: 86-311-67902761-8:00

Fax: 86-311-67902762

Send your inquiry directly to us (0 / 3000)