Business Integrity And Mutual Benefit

Home ProductsSteel Grating Clamps

bar grating saddle clips

Certification
Good quality Galvanized Serrated Grating for sales
My grate came today and it fit perfectly. Thank you. Let me know if there is anywhere that I can leave positive feedback about your company!

—— Andrew Mullen

I'm Online Chat Now

bar grating saddle clips

High Strength Steel Bar Grating Saddle Clips Vandal Resistant Three Type Optional

  • High Strength Steel Bar Grating Saddle Clips Vandal Resistant Three Type Optional
  • High Strength Steel Bar Grating Saddle Clips Vandal Resistant Three Type Optional
Product Details:

High strength vandal resistant best quality steel grating clamp

Introduction of steel grating clamp

It's a series of metal bars positioned vertically,placed an equal distance apart and joined by cross members to form a rectangular or reticuline pattern.

1. Material

mild carbon steel,stainless steel,aluminum

2. Bearing bar

It's the vertically positioned bars.

 

Size:from 3/4"×1/8" to 7"×1/2"

Bearing bar pitch: from 15/16" to 38/16"

3. Cross bar

Used to secure the position of the bearing bars.

Cross bar pitch: 2" or 4"

4. Optional surface

Plain surface

Serrated surface

Surface Treatment:Untreated, Painting or Hot dip Galvanizing

G - galvanized(Hot dip galvanized, Cold dip galvanized)

P - painted(Painted, Powder coated)

U - untreate

Steel Grating standard:
China: YB/T4001.1-2007(YB/T4001.1-1998)
Britain: BS4592-1:1995
US: ANSI/NAAMM(MBG531-93)
Australia: AS1657-1992

Charaterristics:The installation has the advantages of simple construction, light weight, good impact resistance, good bearing capacity ability,rather large water displacement characteristics, corrosion and rust resistance.

Feature of steel grating clamp

1.Optimum water draining: Water leakage area reaches 83.3%,which is more than two times larger than that of cast iron.

2.Hot-dip galvanizing: Good antirust performance,maintenance free and replacement free.

3.High strength: With strength and toughness far higher than those of cast iron,it can be used in the environment with large span and heavy load,such as the wharf and the airport.

Type of steel grating saddle clip Applicable for bearing bar space
A-30 B-30 C-30 (Bearing bar pitch) 30mm
A-40 B-40 C-40 (Bearing bar pitch) 40mm
A-60 B-60 C-60 (Bearing bar pitch) 60mm
em steel grating clamp
Bearing Bar 3/4"x1/8"to 7"x1/2"
Bearing Bar Pitch 15/16" to 38/16"
Cross Bar Pitch 2" or 4"
Surface plain,serrated
Size (mm) Weight kg/m2 Size(mm) Weight kg/m2
255/30/50 54.1 255/30/100 45.8
325/30/50 64.6 325/30/100 56.2
355/30/50 69.1 355/30/100 60.7
405/30/50 76.6 405/30/100 68.2
455/30/50 84.0 455/30/100 75.7
505/30/50 91.5 505/30/100 83.2
555/30/50 99.0 555/30/100 90.7
605/30/50 106.5 605/30/100 98.3
655/30/50 114.0 655/30/100 105.7
Size(mm) Weight kg/m2 Size(mm) Weight kg/m2
255/40/50 45.8 255/40/100 37.4
325/40/50 53.9 325/40/100 45.6
355/40/50 57.4 355/40/100 49.1
405/40/50 63.2 405/40/100 54.9
455/40/50 69.1 455/40/100 60.7
505/40/50 74.9 505/40/100 66.6
555/40/50 90.7 555/40/100 72.4
605/40/50 86.5 605/40/100 78.2
655/40/50 92.4 655/40/100 84.0

Stainless Steel Bar Grating Saddle Clips Galvanised J / M Steel Grating Clips Fastener

  • Stainless Steel Bar Grating Saddle Clips Galvanised J / M Steel Grating Clips Fastener
  • Stainless Steel Bar Grating Saddle Clips Galvanised J / M Steel Grating Clips Fastener
Product Details:

Galvanised steel grating clips fastener Stainless Steel Grating Clips

Stai Stainless Steel Grating Clips & Fasteners

  • “J” Clips
    - Hold a single bar and are nearly the same height as the grating
    - These clips can be pulled down completely to the support under the grating
    - Grating Thicknesses 5/8” 1” 1 ½” and 2”
  •  
  • “M” Clips (saddle clips)
    - Hold two bars and can be used to snug the grating to the support.
    - For Molded bar spacing @ 1” 1 ½”narrow 1 ½”wide and 2”
    - Clips for Pultruded Grating thicknesses from 1” 1 ½ “ and 2”
  •  
  • EPC (end panel clips)
    - Used to hold two separate pieces of grating, or two separate panels of grating
    - These should be used where a grating seam crosses a walking path and there is no support immediately under that seam
    - EPC Clips are offered for grating thicknesses of: 1”, 1 ½”, and 2”

 

Application: Attaches grating to structure

Contract Catalog Item:Y

Distance Between Grating Bars:1-1/2"

Expanded Catalog Item:Y

Finish:Galvanized or stainless steel

Grating Bar Depth:2-3/4"

Grating Bar Width:7/8"

Material:Steel

Model Compatibility:Bar Grating, 1-3/16" on Center, 1-1/2" Tall

Style:Mechanical Clamp

Type:Grating G-Clip

Product Weight:9 lbs.

Applications:Attaches Grating to Structure

Notes:Quick Install, Work Done Above Grating, No Damage to Structures

 

Types of fixing clips:

 

* Type A - comprising a top clip with double saddle, a lower clip with teeth and a M10 (or M8)
* Type B - comprising a top clip with double saddle (of which one saddle can secure the two bearing bars of adjacent panels), a lower clip with teeth and a M10 (or M8)
* Type C - comprising a top clip with double saddle and a M10 (or M8)

product code screw dia (mm) grating width (mm) grating depth (mm)
min max max
GRAT 1G08 M08 30 41 50

Technical Data

product code material/finish screw
dia
body
width (mm)
tightening
torque (Nm)
GF3 S08 ASSY 304 stainless steel M08 0.625 8
GF1 G10 ASSY galvanised malleable iron M10 0.750 5

RP Molded Grating Bar Grating Saddle Clips / Stainless Steel M Clip Assemblies

  • RP Molded Grating Bar Grating Saddle Clips / Stainless Steel M Clip Assemblies
Product Details:

Stainless Steel M clips FRP Molded Grating Used Metal Saddle Clips

 

Popular grating accessories are available from P&R Metals. No grating job is complete without the necessary clips, plates, bolts and seats. We carry specialized accessories for our bar grating.

"M" Clips hold two bars and can be used to snug the grating to the support. Due to the extra holding capabilities, these are specifically recommended for stair treads. Stair treads should have a minimum of four clips on each tread.

 

1. Standard Type M-type, L-type, C-type, W-type, J-type and G-type

2. We have stock for standard type of clip
3. Material: Galvanized, SS201 SS 304, SS316L
4. Production under ISO 9001 quality control

5. Free samples can be provided.

6. Payment: T/T, Western Union

7. Carton box package

8. 7 days delivery

 

When drilling the support member has to be avoided, the J-type clip offers the solution. The J-clip could be through grating square hole with a square nut, we could torque the bolt from grating top. A heavier top clip then completes the assembly to carry the loads. The clip provides excellent bidirectional holding capability for molded square mesh fiberglass grating

Fasteners / Clip Assemblies For Fiberglass Products:

Clips can be used to secure grating or plate to the supporting structure or fasten adjacent gratings panels to minimize load induced differential deflection. Maximum recommended clip spacing is 48 inches on center with a minimum of four (4) clips per piece of grating.

 

Application

 

Chemical & Petrochemical Plants

Food & Beverage Plants

Oil & Gas, Offshore Rig & Power Plants

Water Treatment Plants & Water Pools

Ramp, Scaffold, Railway Footpath

Operating Platforms & Trench Covers

Walkways, Footbridges & Staircase

Architecture & Construction Industry

Thick (MM)
Mesh size (MM)
Panel size (MM)
Open area (%)
Weight (kg/m2)
25


38*38

1220*2440
2440*3660
65
12.5
30
68
15.5
38
68
19.5
30

(top)19*19/(bottom)38*38
1220*2440
2440*3660
30
20
38
30
24

 

Item

Thickness

mm

Mesh Size

mmxmm

Panel Size

mmxmm

Weight

kg/Square Meter

01 15 38x38 1223x3660 7
02 15 50x50 1223x3660 6.5
03 25 25x100 1010x3010 12.4
04 25 19x19 1223x3660 12.5
05 30 19x19 1223x3660 21.5
06 30 38x38 1223x4040 15.1
07 38 19x19 1223x3660 22.8
08 38 38x38 1000x4040 19.5
09 38 38x38 1223x3660 19.5
10 40 40x40 1250x3690 19.3
11 50 50x50 1223x3660 21.5

 

Low Carbon Steel Bar Grating Saddle Clips Type A Type C 3mm / 4mm Thickness

  • Low Carbon Steel Bar Grating Saddle Clips Type A Type C 3mm / 4mm Thickness
Product Details:

Steel grating clamps fastener used in construction type A type c

 

Steel grating clamp for platform

  • Material of steel grating clamp: Low Carbon Steel then galvanized
  • Fabricating Method: The press welded steel grating, requested by the customers, is made of load flat steel

bar and cross rods, placed, horizontally and vertically, and at an equal pitch apart, by welding with 200-ton

hydraulic resistance automatic welding equipment, then cutting, punching and banding ends.

  • Load Bearing Steel Bar Pitch: Pitch between the two neighboring load bearing steel bars is 30mm or 40mm.
  • Cross Rod Pitch: Pitch between two neighboring cross rods is usually 50mm or 100mm.

steel grating clamp specifications

  • Bearing Bar (Load Bar) Specifications (mm):

The specification of plain type and serrated type bearing bar is 20 x 3 to 100 x 10;

the specification of I-section type is 25 x 5 x 3, 32 x 5 x 3, 38 x 5 x 3, 40 x 5 x 3, 50 x 5 x 3, 50 x 7 x 4,

55 x 7 x 4, 60 x 7 x 4, 65 x 7 x 4, 70 x 7 x 4, 75 x 7 x 4, etc.

  • Bearing Bar Pitch (center to center):

America standard is available

1'' x 3/16'', 1 1/4'' x 3/16'', 1-1/2'' x 3/16'', 1'' x 1/4'', 1-1/4'' x 1/4'', 1 1/2'' x 1/4''(19-w-4),(19-w-2) and so on.

  • Cross Bar Pitch (center to center):

38, 50, 76, 100, 101.6mm etc.
50, 100mm are recommended

  • Surface Treatment:

Untreated, Painting or Hot dip Galvanizing

steel grating clamp application:
steel grating clamp are widely used by various plants such as

  • electric power
  • petroleum
  • chemical industry
  • metallurgy industry
  • machinery industry
  • shipbuilding
  • oceanographic engineering
  • building materials
  • paper mills
  • cement plant
  • medicine
  • spinning and weaving
  • foodstuff factory
  • transportation
  • municipal administration
Trade Terms
  • Trade terms: FOB, CFR, CIF, L/C
  • Payment term: 30% T/T in advance 70% against B/L copy
  • MOQ: 100pc
  • Port: Tianjin
  • Sample time: 5-7 days
  • Lead time: 10-30 days (Depend on quantity)
  • Shipment: By sea
steel grating standrd
  steel grating standard steel standard galvanizing standard
China YB/T 4001.1-2007 GB 700-88 GB/T 13912-2002
USA ANSI/NAAMM (MBG531) ASTM (A36) ASTM (A123)
U.K. BS 4592 BS4360 (43A) BS 729
AUS AS 1657 AS 3679 AS 1650
ries Series distance Traverse line distance Load flat specifications (wide×thick)
20×3 25×3 32×3 40×3 20×5 25×5
1 30 100 G203/30/100 G253/30/100 G323/30/100 G403/30/100 G205/30/100 G255/30/100
50 G203/30/50 G253/30/50 G323/30/50 G403/30/50 G205/30/50 G255/30/50
2 40 100 G203/40/100 G253/40/100 G323/40/100 G403/40/100 G205/40/100 G255/40/100
50 G203/40/50 G253/40/50 G323/40/50 G403/40/50 G205/40/50 G255/40/50
3 60 50 - G253/60/50 G253/60/50 G403/60/50 G205/60/50 G255/60/50

 

series Series distance Traverse line distance Load flatspecifications (wide×thick)
32×5 40×5 45×5 50×5 55×5 60×5
1 30 100 G325/30/100 G405/30/100 G455/30/100 G505/30/100 G555/30/100 G605/30/100
50 G325/30/50 G405/30/50 G455/30/50 G505/30/50 G555/30/50 G605/30/50
2 40 100 G325/40/100 G405/40/100 G455/40/100 G505/40/100 G555/40/100 G605/40/100
50 G325/40/50 G405/40/50 G455/40/50 G505/40/50 G555/40/50 G605/40/50
3 60 50 G325/60/50 G405/60/50 G455/60/50 G505/60/50 G555/60/50 G605/60/50

 

Welded Type 316L Bar Grating Saddle Clips 100mm / 50mm M Span SGS Approval

  • Welded Type 316L Bar Grating Saddle Clips 100mm / 50mm M Span SGS Approval
Product Details:

Q235 304 316L welded type 325 steel grating clamp grating clips

 

 

Material of steel clips: Q235 stainless steel 304
  • Machining processes: Metal fabrication, machining, welding, forming, shaping, punching, drilling, milling, grinding, rolling, stamping, deep drawing, bending, welding, etc
  • Size:

    The specification of plain type and serrated type bearing bar is 20 x 3 to 100 x 10;the specification of I-section type is 25 x 5 x 3, 32 x 5 x 3, 38 x 5 x 3, 40 x 5 x 3, 50 x 5 x 3, 50 x 7 x 4, 55 x 7 x 4, 60 x 7 x 4, 65 x 7 x 4, 70 x 7 x 4, 75 x 7 x 4, etc.

    2) Bearing Bar Pitch (center to center):

    12.5, 15,25, 30, 30.16, 32.5, 34, 40, 41.25, 45, 50, 60, 60.32, 80, 100 mm etc, also be according to client's requirement and 30, 40, 60mm are recommended,

    America standard is available <1' x 3/16', 1 1/4' x 3/16', 1-1/2' x 3/16', 1' x 1/4', 1-1/4' x 1/4', 1 1/2' x 1/4'(19-w-4),(19-w-2) and so on.>

    3) Cross Bar Pitch (center to center):

    38, 50, 76, 100, 101.6mm etc, also be according to client's requirement and 50, 100mm are recommended, America standard is available.

  • Surface treatment:galvanizing, powder coating
  • Application:Industry, Electrical industry, Mining industry, mechanical, metals, components for furniture, auto, machines etc.

steel grating clamp Advantage

1, factory direct offer

2, OEM, all with your design

3, tolerance:+/-0.01mm

4, feature:Firm, durable, artistic, devisable and reasonable price

 

Payment Terms

1, T/T 30% deposit, the balance paid against the copy of B/L

2, L/C 100% irrevocable L/C at sight

3, West-Union (small order)

4,PayPal (small order)

 

Contact Details
ANPING BAOSHENG WIRE MESH PRODUCTS CO.,LTD

Contact Person: Mr.

Tel: 86-311-67902761-8:00

Fax: 86-311-67902762

Send your inquiry directly to us (0 / 3000)